Diesel Engines

This video demonstrates a Fuel Injector installation on a Ford 6.0 Liter application.

This video demonstrates a Fuel Injector installation on a Dodge Cummins 5.9 Liter application.

See how to install the EGT sensor which is responsible for reading the temperature of the exhaust and sending this information back to the ECU to control exhaust after treatment.

Tips on powerstroke vacuum pump replacement on a 6.0L Ford Powerstroke diesel engine.   Transcript: Powerstroke Vacuum Pump Replacement. Let’s discuss replacing the vacuum pump on this, ’03 Ford truck with a six-liter diesel engine. Now, because it’s a diesel engine it’s not going to have engine vacuum. It’s gonna’ need a vacuum pump such…

How to replace the thermostat on a 6.0L Ford Powerstroke diesel engine. Ensure that all of the air is bled out of the cooling system after replacement.   Transcript: Let’s take a look at the process, in which we’re gonna replace the thermostat on this Ford truck with a 6.0L Powerstroke diesel engine. Now we’re…

How to replace the fan clutch on a 6.0L Ford Powerstroke diesel engine. Never use an air chisel to break the fan clutch loose. This damages the unit as well as the water pump bearing.   Transcript Let’s take a look at what it takes to replace the fan clutch on this ’03 Ford truck…

How to install Fuel Pressure Regulator kit for a 6.0L Ford Powerstroke diesel engine. The fuel pressure regulator kit is commonly referred to as the “Blue Spring” kit as it contains a blue spring.    

How to remove and repair the FICM (Fuel Injector Control Module) on a 6.0L Ford Powerstroke diesel engine. If the FICM has 7 screws holding it in the housing, the FICM is not repairable.      

How to replace the turbo actuator on a 6.0L Ford Powerstroke engine.The turbo actuator may fail either electrically or due to constricted oil passageways.      

How to install the turbo drain tube on a 6.0L Ford Powerstroke diesel engine.