Articles and videos focusing on diagnosing and troubleshooting problems related to heavy duty engines.

Installing a Timken Set-Right Preset Bearing

You can keep your trucks running smoothly by replacing the wheel end bearings using the manufacturer’s recommended schedule. In this video, you’ll see how to install a set-right preset bearing.

Adjusting Heavy Duty Wheel Bearings

As you can figure out from their name, preset bearings don’t require any setting or adjusting. If you’re not using a preset bearing, you have to adjust the bearings to create the right clearance between the inner and outer races.

Installing a Timken Premium Seal

A seal defends your wheel bearings from water, dirt, and debris, but it can only do its job if it is properly installed. Today I’m going to show you the right way to install our premium seals on a commercial vehicle wheel end.

Programming a Hub Odometer

A hub odometer provides a simple way to measure the miles on your trailers, so you know when it’s time for maintenance. This video will show you how to program a Timken hub odometer.

Removing a 2-Piece Seal Wear Ring

How to remove a wear ring from a two piece wheel seal.

Tips for Removing Cups from Wheel Hubs

Bearing cups, or races, are designed with a tight fit in their hub. This keeps the cup from slipping or spinning in the hub, but the tight fit makes removing cups tough when replacing the bearing.

Quality Brands

Send this to friend